2013年8月22日星期四

Cause bearing failure caused

According to the bearing surface grinding metamorphic layer formation mechanism, the impact grinding metamorphic layer of the main factors is the grinding heat and grinding force. The following analysis on the reasons for bearing failure.

1 bearing the grinding heat

The roller bearing grinding, the grinding wheel and the workpiece contact area, consume large amounts of energy, resulting in a large number of grinding heat, causing the local instantaneous grinding zone temperature. Use of linear motion heat transfer theory derivation, calculation or application infrared and thermocouple method measured the instantaneous temperature under experimental conditions can be found in the 0.1 ~ 0.001ms instantaneous temperature within the grinding zone up to 1000 ~ 1500 ℃. Such instantaneous temperature, a certain depth sufficient to work the surface layer of high temperature oxidation, amorphous structure, high-temperature tempering, secondary hardening, cracking and other changes or burns.

(1) the surface oxide layer

The instantaneous high temperature steel surface under the role of oxygen in the air, up into very thin (20 ~ 30nm) thin layer of iron oxide. It should be noted that the oxide layer thickness and the total thickness of the surface layer of grinding deterioration test results showed a corresponding relationship. This shows that the thickness of the oxide layer which is directly related with the grinding process, the grinding quality is an important symbol.

(2) amorphous tissue layer

Instantaneous grinding zone so that the surface temperature reaches a molten state, the molten metal molecular flow has been evenly coated on the work surface, and is the base metal at breakneck speed cooling, forming a thin layer of amorphous tissue layer. It has high hardness and toughness, but it is only about 10nm, it is easy to be removed precision grinding.

(3) high-temperature tempering layer

Instantaneous grinding zone temperature to a certain depth can (10 ~ 100nm) is heated to a temperature above the tempering heating the workpiece. Does not reach the austenitizing temperature in the case, as the heating temperature is increased, the surface layer by layer will be generated corresponding to the temperature of the heating or tempering retempered organizational changes, hardness is decreased. The higher the heating temperature, the hardness decreased also more powerful.

没有评论:

发表评论